The MyDigitalSSD SBX SSD Review: NVMe On The Cheap
by Billy Tallis on May 1, 2018 8:05 AM ESTSequential Read Performance
Our first test of sequential read performance uses short bursts of 128MB, issued as 128kB operations with no queuing. The test averages performance across eight bursts for a total of 1GB of data transferred from a drive containing 16GB of data. Between each burst the drive is given enough idle time to keep the overall duty cycle at 20%.
The burst sequential read speed of the MyDigitalSSD SBX is clearly faster than what SATA drives offer, but the Samsung drives and even the larger capacities of the Intel SSD 760p are in an entirely different league. The Phison E7 drives with planar MLC offer about the same performance as the SBX.
Our test of sustained sequential reads uses queue depths from 1 to 32, with the performance and power scores computed as the average of QD1, QD2 and QD4. Each queue depth is tested for up to one minute or 32GB transferred, from a drive containing 64GB of data.
The flash is clearly much more of a bottleneck than the PCIe x2 interface on the longer sequential read test, where the internal fragmentation left over from the random write test prevents the SBX from delivering data any faster than the SATA SSDs. The Intel SSD 760p performs even worse at 128GB, but beats the SBX at 512GB.
Power Efficiency in MB/s/W | Average Power in W |
Power efficiency continues to be a downside to the MyDigitalSSD SBX even though its power draw in absolute terms is substantially lower than the other NVMe drives. The Intel 760p is clearly worse off this time with much lower efficiency at every capacity, while Samsung's high-end drives are fast enough to offer efficiency as good or better than SATA drives.
The sequential read performance of the SBX improves a bit between QD2 and QD8, allowing it to eventually surpass the Intel 760p that is generally better at QD1 but doesn't scale up with higher queue depths.
Sequential Write Performance
Our test of sequential write burst performance is structured identically to the sequential read burst performance test save for the direction of the data transfer. Each burst writes 128MB as 128kB operations issued at QD1, for a total of 1GB of data written to a drive containing 16GB of data.
The burst sequential write speed of the MyDigitalSSD SBX exceeds that of SATA SSDs, though only barely in the case of the 128GB SBX. The 128GB Intel 760p fails to keep up with mainstream SATA drives, while the larger capacities have a clear lead over the SBX.
Our test of sustained sequential writes is structured identically to our sustained sequential read test, save for the direction of the data transfers. Queue depths range from 1 to 32 and each queue depth is tested for up to one minute or 32GB, followed by up to one minute of idle time for the drive to cool off and perform garbage collection. The test is confined to a 64GB span of the drive.
On the longer sequential write test, only the 512GB SBX is able to stay ahead of mainstream SATA SSDs. The Intel 760p has a minimal performance lead over the SBX at 128GB, growing to a 22% advantage at 512GB.
Power Efficiency in MB/s/W | Average Power in W |
The MyDitigalSSD SBX's power efficiency during sequential writes is better than Intel's drives, but not much else. The SBX is paying the power cost of PCIe (albeit only two lanes) but delivering SATA performance.
The MyDigitalSSD SBX delivers essentially the same sequential write performance at all tested queue depths, and power usage is also flat. The results from the SBX are most comparable to mainstream SATA drives, while the high-end NVMe drives are generally much faster and more power hungry.
46 Comments
View All Comments
peevee - Friday, May 4, 2018 - link
What dgingeri said. Learn your stuff before commenting.Looks like it is a fraud on the part of manufacturer, or a fk-up on the AT side.
Billy Tallis - Friday, May 4, 2018 - link
Literally everything in your comment is wrong.MajGenRelativity - Tuesday, May 8, 2018 - link
I don't see in your link where it says that drives can switch between NVMe and AHCI.Lolimaster - Saturday, May 5, 2018 - link
The thing is that unless you need to work with huge data (editing for example) buying an NVME SSD makes ZERO sense specially on a laptop with the added powerconsumption and heat vs a sata ssd that will be as fast for all of the usages of a non-prosumer.Lolimaster - Saturday, May 5, 2018 - link
It's nice that you see those 1-2-3GB/s on crystaldiskmark but it's totally wasted for 99% of your daily usage.Lolimaster - Saturday, May 5, 2018 - link
Want faster boot having alreayd an SSD? Enable fast boot on bios to skip some checks.