Assembling the Corsair Carbide Air 540

As it turns out, despite being a very unorthodox case design, the Corsair Carbide Air 540 is also ridiculously easy to build a system in. I never expect a Corsair case to be difficult, but as I've repeated over and over already, this isn't a typical Corsair case. Amusingly, outside of a larger footprint that makes the Air 540 more unwieldy to manipulate, it's actually in many ways even easier to build in than a garden variety ATX case.

For starters, installing the motherboard is a breeze. Corsair includes a mounting/alignment post for the center motherboard mount, and the standoffs for a standard ATX case all come preinstalled. The screws for the case are even sorted into separate baggies for each specific purpose. I'm not sure Corsair could've made mounting the motherboard any easier. Wiring in the motherboard headers is also simple; there are plenty of routing holes around the tray and they're all placed logically. And because the case is designed with enough headroom for radiators in the top and front, your hands never feel crunched. It's spacious but doesn't feel like an inefficient use of space.

Installing drives wasn't without its hiccups, but was still pretty simple. I was pleasantly surprised to see that the 3.5" drive trays in the bottom of the primary chamber actually have SATA backplanes behind them; you don't have to wire up the drives installed in these trays, just the planes themselves. And the trays themselves are toolless and exactly flexible enough to wrap around and secure 3.5" drives.

In the rear chamber, the toolless 2.5" drive cage looks a little chintzy but definitely gets the job done. Drives installed feel secure, but you're really going to want 9.5mm drives instead of slimmer ones as these cages seem to have been designed specifically for those exact dimensions. My only complaint as far as drive installation goes has to do with the 5.25" bays. Because of their orientation it's nigh impossible to screw them into place. The bay shields easily pop in and out and they're secure when in place, but you're relying on Corsair's toolless mechanism to keep the 5.25" drive secure. I found with our blu-ray drive that the drive itself would lock into place and couldn't be pushed too far into the Air 540, but was relatively easy to push back out of the case from behind. If you're using a hotswap bay that may require you to pull a drive out, there's a chance you'll have to push it back into the case and back into place.

What really surprised me is that Corsair created an essentially toolless power supply installation. There's a bracket mounted to the bottom fo the 540 that will hold the back corner of the power supply in place; you install the drive between the 2.5" drive cage and the risers in the bottom of the enclosure, then place the bracket and thumbscrew it in. There's still a little bit of wiggle, but it's remarkably secure. If you don't want to go toolless, there are still holes in the rear of the chassis for you to manually screw in the power supply.

Expansion cards, on the other hand, went in pretty easily, and wiring up the whole case proved to be simple as well. There's a copious amount of space in the Air 540 between the 5.25" drive bays and the power supply that allows you to stash cabling without too much fuss. Corsair even intelligently oriented the 5.25" bays and the 2.5" cages; you won't have to twist power leads to bridge between the two. It's a small touch but an appreciated one. Note that the three 140mm fans included all use three-pin connectors and Corsair does not include molex adapters for them.

I feel like the only thing that could really keep someone from doing a speedy assembly of the Carbide Air 540 is just the slightly alien design itself. Corsair has done everything they can to make it as simple as possible, and while I'm not sold on the mounting system for the 5.25" drive bays, it at least gets the job done. I'm as happy with the case's ease of assembly as I am with its aesthetics: it's not just a good-looking case, it's an easy to use one as well.

In and Around the Corsair Carbide Air 540 Testing Methodology
Comments Locked

39 Comments

View All Comments

  • SunLord - Wednesday, July 3, 2013 - link

    All that wasted space in the back chamber is a major turnoff to me. With all that space I would've prefered to of had some more hdd bays they could've gotten at least 3 or 4 3.5" bays in the massive back void
  • hammer256 - Wednesday, July 3, 2013 - link

    Looks like the little brother of CaseLabs' Magnium line of double-wide cases. Of course, CaseLabs is also a lot more expensive...
  • Ninhalem - Monday, July 8, 2013 - link

    Also Case Labs' enclosures are all made out of thick aluminum, and are specifically built with modification and custom liquid cooling loops in mind. Although, I must give Corsair credit for thinking outside of the box for a mainstream manufacturer.
  • Popworks - Tuesday, July 16, 2013 - link

    Actually I'm seeing some inspiration from a...

    Black Caselabs M10 with 64mm top and XL window
  • lmcd - Wednesday, July 3, 2013 - link

    I'd have liked to see drives at the top of the case, with 2 2.5 and 1 3.5 configured for hotswap in addition to the 2.5 bays and 3.5 bays available.
  • marc1000 - Wednesday, July 3, 2013 - link

    yeah, the empty space begs for drive bays, but they would be hard to wire and place.

    maybe two 3.5 hot-swap bays below the DVD bays would get the job done - even if a little expensive.

    other than this, pretty awesome case!
  • marc1000 - Wednesday, July 3, 2013 - link

    this is the kind of drive cage i'm talking about: rows of drives in front of the case. just two would be enough (look at first picture of this server case)

    http://www.anandtech.com/show/7121/trials-of-an-in...
  • lmcd - Wednesday, July 3, 2013 - link

    Yeah that's kinda what I was thinking, though I thought at the top of the case. Same idea though.
  • Ammaross - Wednesday, July 3, 2013 - link

    The AzzA Hurrican 2000 has 6 front hot-swap trays. Unfortunately, it wastes about 2 3.5" bays worth to do it.... http://www.targetpc.com/uploads/blog.12.h.jpg
  • kilkennycat - Wednesday, July 3, 2013 - link

    I agree, a cage for 2 stacked HDDS could readily fit the lower left-hand corner (of the plenum view) but the HDDs would definitely need some circulating air to be thermally-happy... there is ZERO airflow within the plenum with the power-supply mounted as pictured. Notice the SSD temperature rise in the graphs - a consequence of no airflow !!! A side-cover fan could be provided, or maybe the following alternate:-

    If there is enough air-clearance between the power-supply and the MB mounting-plate the power-supply could potentially be mounted in an inverted configuration and draw its air from the plenum and rear air-holes -- which would create some air-circulation without an extra fan. Holes in the side-panel over the added HDD-cage would enhance this cooling.

Log in

Don't have an account? Sign up now